KS-Series Effluent Pumps

KSH-Series High Head Effluent Pumps

Features:

	Stainless steel motor housing for corrosion-resistance
	High efficiency hydraulic section for energy saving
	Wide range for applications
	Service friendly
	The KSH series with closed type impeller are suitable for high head application

Submersible Grinder Pumps

Features:

	Double Mechanical Seals in oil bath for superior reliability and long life.
	Corrosion resistant 304 Stainless Steel shaft, motor shell fasteners.
	Solids handling grinder inlet with high head open impeller to pump water containing soft solids in suspension
	Seal sensor fitted to allow detection of first stage seal failure prior to motor damage through water entry.

Applications:

	Grey Water Pumping
	Sump Emptying
	Septic effluent & sewage disposal.
	Pumping of waste water with soft solids in suspension

Effluent Dripline

Features

	An integral dripline with incorporated flow-regulated drippers.
	Purple colouring for easy identification as effluent dripline
	High clogging resistance for worry-free operation
	UV stabilized for worry-free operation
	UV stabilized for surface application
	Also suited for buried or under mulch application
	Strong, seamless tubing construction for added durability
	Complete range of fittings for easy installation

Non Drain Effluent Dripline

Features

	The built-in no-drain device eliminated water draining from the driplines when water has been turned off.
	This feature protects driplines from sucking in of small soil particles or other debris, thus making it ideal for Subsurface Drip Irrigation systems (S.D.I.) and short pulse irrigation in greenhouses.
	Unique flow regulating concept: A wide effective labyrinth, leading into the flow control chamber, where a sensitive floating diaphragm regulates and maintains.
	Constant flow rate at variable inlet pressure.

Effluent Dripline

Features:

	16mm nominal diameter (13.8mm ID)
	Constant flow from 1.0 to 3.0 bars
	High clogging resistance Large intake filter, large cross-sectional labyrinth, self-cleaning mechanism
	120 micron filtration required
	UV stabilized
	Distinctive purple colouring specific for effluent use
	Tubing: LDPE Dripper: PE Diaphragm: Silicon Elastomer
	40mil thickness

Self Cleaner Dripline Filter

Features

	1.25" and G 1.5" BSP threads, max. working pressure
	15 bar, filtering capacity 200-280 l/min, cartridge O
	58x210mm, fixing points on both sides, polypropylene body
	EPDM gaskets. By-pass min. 30l/min

<< RETURN TO THE PREVIOUS PAGE